The word dock, as defined by Webster means “a place for landing.” When we refer to what is dock door, we are actually referring to the threshold or door frame of a ship. This door system plays an important role in the safe and efficient movement of vessels through the water. In fact, it is the single most significant feature that separates a modern commercial vessel from a traditional schooner. Dock Door Operation is a simple process, but a critical one for the safe and successful transportation of cargo to and from the sea, air, and land.
The term dock area refers to the area adjacent to the ship, whether it rests on top of the water or is docked below. It may also refer to the inside area of the boat, i.e. the hold area or stateroom. In the case of boats that carry heavier loads, the term dock area often includes the deck or the whole hull of the boat.
Before discussing what is dock lining, it would be useful to understand what is actually carried in these implements. Container ships, bulk carriers, ferries, long liners, cruise ships, oil platforms, private and public carriers, barges, and bargainer are just some of the types of ships that generally call at or are docked at a dock. A ship can dock either on land or in water depending upon its intended destination and its type. However, there are some exceptions to these general rules.
If the boat is being transported by land, it normally docks in a pier and releases its cargo into the water. On the other hand, if it is being shipped by water, it will firstly enter into the water by boarding and then moving closer to a floating dock line until it becomes almost next to the shoreline. This is referred to as the first point of entry.
The process of entering and exiting the water or docked at a dock begins at the second point of entry called the dock door. This is a heavy iron door at the edge of the water. At the dock door there is an iron chain or rope that attaches it to the dock. The chain or rope is then raised and towed away from the boat via a dock ladder. It is then lifted up and brought to the level of the water by using a special crane. This crane is called the dock waiter and works with the help of a swivel drum.
After the boat has reached the dock door the boat’s movement is then restricted to only three directions – up and down, in and out. The boat must be pointed into the sun and must not be pointed into any water or pointed out any other way. After this the boat will be secured to the dock using a chain or rope and a dock ladder. The boat will then be brought back into the water by reversing the process described above. This dock line is used to raise the boat back into the water so that it may be released.
Another common question about what is dock relates to the use of a motorboat. One popular type of motorboat is a bass boat. Bass boats are very difficult to ship due to the number of movements that they make when being moved. The use of a trailer is then required for the boat to be successfully transported to the lake or other waterway where it can be used.
In order to get a boat to the water and to be safely used, there are three main points of entry and exit that must be made along the length of the boat. These points are the waterline entrance, the boat door, and the dock entry. There are also various types of locks that can be used to help keep the boat in place when it is being transported to the specified location. The most common lock is the chain lock but other locks such as that used on cruise ships are also used.